Lowrance HDS-5m Gen2 HDS 5m 7m Operation Manual - Page 81
Units, Time Period
View all Lowrance HDS-5m Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Settings Time Period Controls how much time will pass before a point is placed along the trail. To set Time Period: 1. Highlight Time Period and press enter. The distance period keypad will appear. 2. Input the desired distance and select OK. Press enter. Time Period set to 5 seconds Units Controls the unit of measure used for a variety of data, ranging from distance and speed to heading and barometric pressure. To access the Units menu, select Units from the Settings menu and press enter. To change a unit of measure: 1. Select a unit from the Units menu. Press enter. 2. Select the a unit of measure and press enter. 79
79
Settings
Time Period
Controls how much time will pass before a point is placed along the trail.
To set Time Period:
Highlight
1.
Time Period
and press
ENTER
. The distance period keypad
will appear.
Input the desired distance and select
2.
OK
. Press
ENTER
.
Units
Controls the unit of measure used for a variety of
data, ranging from distance and speed to heading and
barometric pressure. To access the Units menu, select
Units
from the Settings menu and press
ENTER
.
To change a unit of measure:
Select a unit from the Units menu. Press
1.
ENTER
.
Select the a unit of measure and press
2.
ENTER
.
Time Period set to 5 seconds