Lowrance HDS-5m Gen2 HDS 5m 7m Operation Manual - Page 79
Siren Enabled, To silence an alarm, Set Limit, To set alarm limit
View all Lowrance HDS-5m Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Settings To silence an alarm: When an Alarm is triggered, a tone will sound and a alarm window will appear on the screen. Press Enter to silence the alarm and close the alarm window. After alarm is silenced its corresponding alarm bell will continue to flash in the bottom left corner of the screen. To remove the bell from the screen, disable the alarm and then enable it again. The bell will not reappear unless the alarm is triggered. Set Limit Sets thresholds (limits) that will trigger the alarm when met or exceeded. If a threshold can be set for a particular alarm, the Set Limit button will appear at the bottom of the screen when that alarm is highlighted on the alarm list. To set alarm limit: 1. Highlight the desired alarm on the alarm screen and press Menu. 2. Select Set Limit and press enter. The Alarm Limit keypad will appear. 3. Input the desired alarm threshold and Set limit selected on Water press enter. Temp Rate menu Siren Enabled When the Siren is enabled, a tone will sound when an alarm is triggered. To enable alarm sirens, highlight Siren Enabled on the Alarms menu and press ENTER. 77