MSI 785GM User Guide - Page 49
MS-7596, VGA Share Memory, SIDEPORT Memory Frequency, UMA-SP Interleave Mode, Boot Sequence, Press
View all MSI 785GM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
MS-7596 ▶ UMA Location This item is used to select the location of UMA to avoid over-lapping with the other data blocks in system memory. ▶ On-chip VGA This item specifies whether to allocate the memory for onboard VGA from the system memory or sideport memory. Setting to [UMA], allocates the system share memory for onboard VGA. Setting to [SIDEPORT], allocates the sideport memory for onboard VGA. Setting to [UMA+SIDEPORT], allocates both system memory and sideport memory for onboard VGA. ▶ VGA Share Memory The system shares memory to the onboard VGA card. This setting controls the exact memory size shared to the VGA card. ▶ SIDEPORT Memory Frequency This item allows you to set the SIDEPORT memory frequency (in MHz). ▶ UMA-SP Interleave Mode This item allows you to adjust the ratio of UMA to SIDEPORT memory. ▶ Boot Sequence Press to enter the sub-menu and the following screen appears: ▶ 1st Boot Device This item allows you to set the first boot device where BIOS attempts to load the disk operating system. ▶ Boot From Other Device Setting the option to [Yes] allows the system to try to boot from other device, if the system fails to boot from 1st boot device. ▶ Trusted Computing Press to enter the sub-menu and the following screen appears: ▶ Clearing the TPM Press Enter to clear the TPM status. 3-11