MSI 790GX User Guide - Page 21
Installing Memory Modules - ddr2
View all MSI 790GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Hardware Setup Installing Memory Modules 1. The memory module has only one notch on the center and will only fit in the right orientation. 2. Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. The plastic clip at each side of the DIMM slot will automatically close when the memory module is properly seated. Important You can barely see the golden finger if the memory module is properly inserted in the DIMM slot. 3. Manually check if the memory module has been locked in place by the DIMM slot clips at the sides. Volt Notch Important - DDR3 memory modules are not interchangeable with DDR2 and the DDR3 standard is not backwards compatible. You should always install DDR3 memory modules in the DDR3 DIMM slots. - In dual-channel mode, make sure that you install memory modules of the same type and density in different channel DDR DIMMs. - To enable successful system boot-up, always insert the memory modules into the DIM M1 first. 2-7