MSI 848P NEO-V User Guide - Page 48

BIOS Setup USB Device Wakeup From S3 This item allows the activity of the USB device to wake up the system from S3 (suspend to RAM) sleep state. Setting: [Enabled], [Disabled]. Keyboard PowerOn Function This controls how and whether the PS/2 keyboard is able to power on the system.You must type the password to power on the system. Settings: [Disabled], [Any Key], [Specific Key]. Specific Key for PowerOn Specify the password to enable for the Keyboard PowerOn Function while setting to [Specific Key]. Mouse PowerOn Function This controls how and whether the PS/2 mouse is able to power on the system. Settings: [Disabled], [Any Action], [Left-button] and [Right-button]. Resume On PME# This field specifies whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected. Settings: [Enabled], [Disabled]. Resume On RTC Alarm This is used to enable or disable the feature of booting up the system on a scheduled time/date from the soft off (S5) state. Settings: [Enabled], [Disabled]. RTC Alarm Date/Hour/Minute/Second If Resume On RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields. Available settings for each item are: Alarm Date 01 ~ 31, Every Day Alarm Hour 00 ~ 23 Alarm Minute 00 ~ 59 Alarm Second 00 ~ 59 MSI Reminds You... If you have changed this setting, you must let the system boot up until it enters the operating system, before this function will work. 3-15