MSI 865PEM2 User Guide - Page 56
Serial ATA Port 1/2 Mode, Onboard Device
View all MSI 865PEM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
BIOS Setup Serial ATA Port 1/2 Mode When On-Chip Serial ATA is set to Legacy Mode, setting options will show as follows: 1. Primary Master => Serial ATA Port 1/2 will be set to Primary Master. 2. Primary Slave => Serial ATA Port 1/2 will be set to Primary Slave. 3. Secondary Master => Serial ATA Port 1/2 will be set to Secondary Master. 4. Secondary Slave => Serial ATA Port 1/2 will be set to Secondary Slave. When On-Chip Serial ATA is set to Native Mode, setting options will show as follows: 1. SATA1 Master => Serial ATA Port 1 will be set to Native Mode Master. 2. SATA2 Master => Serial ATA Port 2 will be set to Native Mode Master. Onboard Device Press to enter the sub-menu and the following screen appears: For 865G 3-17
3-17
BIOS Setup
Serial ATA Port 1/2 Mode
When
On-Chip Serial ATA
is set to
Legacy Mode
, setting options will
show as follows:
1.
Primary Master
=> Serial ATA Port 1/2 will be set to
Primary Master.
2.
Primary Slave
=> Serial ATA Port 1/2 will be set to
Primary Slave.
3.
Secondary Master
=> Serial ATA Port 1/2 will be set to
Secondary Master.
4.
Secondary Slave
=> Serial ATA Port 1/2 will be set to
Secondary Slave.
When
On-Chip Serial ATA
is set to
Native Mode
, setting options will
show as follows:
1.
SATA1 Master
=>
Serial ATA Port 1 will be set to
Native Mode Master.
2.
SATA2 Master
=>
Serial ATA Port 2 will be set to
Native Mode Master.
Onboard Device
Press <Enter> to enter the sub-menu and the following screen appears:
For 865G