MSI 865PEM2 User Guide - Page 58

AC97 Modem, Onboard LAN Device, Onboard 1394 Device, Super IO Device, Onboard FDC Controller,

Get MSI 865PEM2 PDF manuals and user guides View all MSI 865PEM2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

BIOS Setup AC97 Modem Auto allows the mainboard to detect whether a modem is used. If a modem is detected, the onboard AC'97 modem controller will be enabled; if not, it is disabled. Disable the controller if you want to use other controller cards to connect a modem. Settings: Auto, Disabled. Onboard LAN Device (for 865PE) This setting is used to enable/disable the onboard 10/100Mbps LAN controller. Setting options: Disabled, Enabled. Onboard 1394 Device (for 865PE) This setting is used to enable/disable the onboard IEEE1394 controller. Setting options: Disabled, Enabled. Super IO Device Press to enter the sub-menu and the following screen appears: Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it. If you install add-on FDC or the system has no floppy drive, select Disabled in this field. The settings are: Enabled and Disabled. Onboard Serial Port 1/Port 2 Select an address and corresponding interrupt for the first and second serial ports. The settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto. 3-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
3-19
BIOS Setup
AC97 Modem
Auto
allows the mainboard to detect whether a modem is used.
If a mo-
dem is detected, the onboard AC’97 modem controller will be enabled;
if not, it is disabled.
Disable the controller if you want to use other con-
troller cards to connect a modem.
Settings:
Auto
,
Disabled
.
Onboard LAN Device
(for 865PE)
This setting is used to enable/disable the onboard 10/100Mbps LAN
controller.
Setting options:
Disabled
,
Enabled
.
Onboard 1394 Device
(for 865PE)
This setting is used to enable/disable the onboard IEEE1394 controller.
Setting options:
Disabled
,
Enabled
.
Super IO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) in-
stalled on the system board and you wish to use it. If you install add-on
FDC or the system has no floppy drive, select Disabled in this field. The
settings are:
Enabled
and
Disabled
.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second
serial ports. The settings are:
3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,
Disabled, Auto
.