MSI 945GM3-F User Guide - Page 52

BIOS Setup Re-Call VGA BIOS from S3 W hen ACPI Standby State is set to [S3/STR], users can select the options in this field. Selecting [Yes] allows BIOS to call VGABIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming from S3. Suspend Time Out (Minute) If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Power Button Mode This feature allows users to configure the Power Button function. Settings are: [On/Off] The power button functions as a normal power-on/-off button. [Suspend] W hen you press the power button, the computer enters the suspend/sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. Restore on AC Power Loss This setting specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Power Off] Leaves the computer in the power off state. [Power On] Leaves the computer in the power on state. [Last State] Restores the system to the previous status before power failure or interrupt occurred. Wakeup Event Setup Press to enter sub-menu and the following screen appears. Resume From S3 By USB Device This setting allows you to wake up the system from S3 state. Resume By PS/2 Keyboard This controls how and whether the PS/2 keyboard is able to power on the system. If you choose [Specific Key], you must type the password to power on the system. 3-15