MSI MEG Trident X2 13th Quick Start Guide - Page 3

How to Use this Service Guide This Service Guide is designed for MSI-authorized dealers or service centers. It provides in-depth illustration of disassembling/assembling the system. Since the topics in this guide may be related, it is recommended that you read it from cover to cover first. After that, you may go directly to any specific topic that most meets your immediate needs. ⚠ Important All information is subject to change without prior notice. The system photos are provided for demonstration only. The internal view of your system may vary depending on the model you purchased. Necessary Tools Screwdriver Pliers Tweezers Anti-Static Gloves Safety Instructions The following precautions should be observed while handling the product. It is always suggested that users contact the authorized MSI service center for advanced tech support if needed. ∙ Refer servicing to qualified personnel only. ∙ Disconnect all power sources and place the product on a steady surface before disassembly/reassembly. ∙ When unplugging the power cord, always hold the connector part of the cord. Never pull the cord directly. ∙ Do not place the product in environments subject to mist, smoke, vibration, excessive dust, salty or greasy air, or other corrosive gases and fumes. ∙ To avoid electrostatic discharge, use an anti-static wrist strap before handling components. Always handle electrostatic-sensitive components, parts, and assemblies only at static-free work areas. ∙ Handle components with care. Do not touch the pins or contacts on a component. ∙ Place components on a grounded anti-static pad or on the bed that came with the components whenever the components are separated from the product. ∙ Do not perform any maintenance with wet hands. ∙ Prevent foreign substances, such as water, other liquids or chemicals, from entering the product while performing disassembly/reassembly. How to Use this Service Guide 3