MSI MEG Z390 ACE User Manual - Page 69
USB Standby Power at S3/S4/S5 [Disabled], Restore after AC Power Loss [Power Off]
View all MSI MEG Z390 ACE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
fLegacy USB Support [Enabled] Sets Legacy USB function support. [Auto] The system will automatically detect if any USB device is connected and enable the legacy USB support. [Enabled] Enable the USB support under legacy mode. [Disabled] The USB devices will be unavailable under legacy mode. f Power Management Setup Sets system Power Management of ErP and AC Power Loss behaviors. Press Enter to enter the sub-menu. fErP Ready [Disabled] Enables or disables the system power consumption according to ErP regulation. [Enabled] Optimize the system power consumption according to ErP regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe devices. [Disabled] Disables this function. fRestore after AC Power Loss [Power Off] Sets the system behaviors while encountering the AC power loss. [Power Off] Leaves the system in power off state after restoring AC power. [Power On] Boot up the system after restoring AC power. [Last State] Restores the system to the previous state (power on/ power off) before AC power loss. fSystem Power Fault Protection [Disabled] Enables or disables the system to boot up when detecting abnormal voltage input. [Enabled] Protect the system from unexpected power operation and remain the shut down status. [Disabled] Disables this function. fUSB Standby Power at S3/S4/S5 [Disabled] Enables or disables the standby power for all USB ports. This item will be available when Resume By USB Device is Disabled. f Windows OS Configuration Sets Windows OS detailed configuration and behaviors. Press Enter to enter the submenu. fWindows 10 WHQL Support [Disabled] Enables the supports for Windows 10 or disables for other operating systems. Before enabling this item, make sure all installed devices & utilities (hardware & software) should meet the Windows 10 requirements. [Enabled] The system will switch to UEFI mode to meet the Windows equirement. [Disabled] Disables this function. BIOS Setup 69