MSI Z270 SLI PLUS User Manual - Page 49
Restore after AC Power Loss [Power Off], Device Mode [STD Printer Mode]
View all MSI Z270 SLI PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
fDevice Mode [STD Printer Mode] Selects an operating mode for parallel port. [STD Printer Mode] Printer port mode [SPP] Standard Parallel Port mode [EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard Parallel Port mode. [ECP] Extended Capability Port mode [ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel Port-1.9/ 1.7 mode. f Power Management Setup Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press Enter to enter the sub-menu. fEuP 2013 [Disabled] Enables or disables the system power consumption according to EuP2013 regulation. [Enabled] Optimize the system power consumption according to EuP 2013 regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe devices. [Disabled] Disables this function. fRestore after AC Power Loss [Power Off] Sets the system behaviors while encountering the AC power loss. [Power Off] Leaves the system in power off state after restoring AC power. [Power On] Boot up the system after restoring AC power. [Last State] Restores the system to the previous state (power on/ power off) before AC power loss. fSystem Power Fault Protection [Disabled] Enables or disables the system to boot up when detecting abnormal voltage input. [Enabled] Protect the system from unexpected power operation and remain the shut down status. [Disabled] Disables this function. f Windows OS Configuration Sets Windows OS detailed configuration and behaviors. Press Enter to enter the submenu. fWindows 8.1/ 10 WHQL Support [Disabled] Enables the supports for Windows 8.1/ 10 or disables for other operating systems. Before enabling this item, make sure all installed devices & utilities (hardware & software) should meet the Windows 8.1/ 10 requirements. [Enabled] The system will switch to UEFI mode to meet the Windows equirement. [Disabled] Disables this function. BIOS Setup 49