Mackie CFX12.mkII Owner's Manual - Page 21

APPENDIX B: Technical Info

Page 21 highlights

Repair For warranty service, refer to the warranty information on page 22. Non-warranty service for Mackie products is available at a factory-authorized service center. To locate your nearest service center, visit www.mackie.com, click "Support" and select "Locate a Service Center." Service for Mackie products living outside the United States can be obtained through local dealers or distributors. If you do not have access to our website, you can call our Tech Support department at 1800-898-3211, Monday-Friday, normal business hours, Pacific Time, to explain the problem. Tech Support will tell you where the nearest factory-authorized service center is located in your area. APPENDIX B: Technical Info Specifications CFX12, CFX16, CFX20 MKII Mixer Section Frequency Response Mic Input to any Output (Gain at 0 dB): +0, -1 dB, 32 Hz to 20 kHz Distortion THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Output: < 0.05% @ +4 dBu output Noise 20 Hz to 20 kHz BW (150Ω source impedance) Equivalent Input Noise (EIN): -127 dBu Residual Output Noise: Main, Monitor, and Effects outputs Channel & Master levels off -95 dBu Common Mode Rejection Ratio (CMRR) 60 dB @ 1 kHz, Gain @ 0 dB Crosstalk Adjacent Inputs or Input to Output: -90 dB @ 1 kHz Fader Off -90 dB @ 1 kHz Mute Switch and Break Switch Mute -80 dB @ 1 kHz Input Gain Control Range Mono Channels Mic In: Line In: Stereo Channels Line In: +5 dB to +50 dB -15 to +30 dB -20 to +20 dB Phantom Power +48V DC Equalization Low Cut: 100Hz, -18 dB/octave Mono Channel EQ: High ±15 dB @ 12 kHz Mid ±15 dB @ 100 Hz to 8 kHz Low ±15 dB @ 80 Hz Stereo Channel EQ: High ±15 dB @ 12 kHz High Mid ±15 dB @ 3 kHz Low Mid ±15 dB @ 400 Hz Low ±15 dB @ 80 Hz Graphic EQ (9 bands): Q = 1.414, ISO octave centers ±15 dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz Mixer Rated Output Main, Sub, Aux, & Efx: +4 dBu Maximum Rated Output: +20 dBu Maximum Input Levels Mic Input: -28 dBu, Gain @ +50 dB +18 dBu, Gain @ +6 dB Line Input: -8 dBu, Gain @ +30 dB +38 dBu, Gain @ -15 dB Insert Input, Stereo Line Input, Tape Input, and Effects Return: +20 dBu 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

21
Repair
For warranty service, refer to the warranty
information on page 22.
Non-warranty service for Mackie products is
available at a factory-authorized service cen-
ter. To locate your nearest service center, visit
www.mackie.com, click “Support” and select
“Locate a Service Center.” Service for Mackie
products living outside the United States can
be obtained through local dealers or distribu-
tors.
APPENDIX B: Technical Info
Specifications
CFX12, CFX16, CFX20 MKII
Mixer Section
Frequency Response
Mic Input to any Output (Gain at 0 dB):
+0, –1 dB, 32 Hz to 20 kHz
Distortion
THD and SMPTE IMD; 20 Hz to 20 kHz
Mic Input to Main Output:
< 0.05% @ +4 dBu output
Noise
20 Hz to 20 kHz BW
(150
Ω
source impedance)
Equivalent Input Noise (EIN):
–127 dBu
Residual Output Noise:
Main, Monitor, and Effects outputs
Channel & Master levels off
–95 dBu
Common Mode Rejection Ratio (CMRR)
60 dB @ 1 kHz, Gain @ 0 dB
Crosstalk
Adjacent Inputs or Input to Output:
–90 dB @ 1 kHz
Fader Off
–90 dB @ 1 kHz
Mute Switch and Break Switch Mute
–80 dB @ 1 kHz
Input Gain Control Range
Mono Channels
Mic In:
+5 dB to +50 dB
Line In:
–15 to +30 dB
Stereo Channels
Line In:
–20 to +20 dB
Phantom Power
+48V DC
Equalization
Low Cut:
100Hz, –18 dB/octave
Mono Channel EQ:
High
±15 dB @ 12 kHz
Mid
±15 dB @ 100 Hz to 8 kHz
Low
±15 dB @ 80 Hz
Stereo Channel EQ:
High
±15 dB @ 12 kHz
High Mid
±15 dB @ 3 kHz
Low Mid
±15 dB @ 400 Hz
Low
±15 dB @ 80 Hz
Graphic EQ (9 bands):
Q = 1.414, ISO octave centers
±15 dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
Mixer Rated Output
Main, Sub, Aux, & Efx:
+4 dBu
Maximum Rated Output:
+20 dBu
Maximum Input Levels
Mic Input:
–28 dBu, Gain @ +50 dB
+18 dBu, Gain @ +6 dB
Line Input:
–8 dBu, Gain @ +30 dB
+38 dBu, Gain @ –15 dB
Insert Input, Stereo Line Input, Tape Input, and
Effects Return:
+20 dBu
If you do not have access to our website, you
can call our Tech Support department at 1-
800-898-3211, Monday-Friday, normal business
hours, Pacific Time, to explain the problem.
Tech Support will tell you where the nearest
factory-authorized service center is located in
your area.