Magic Chef MCSCD6W1 User Manual - Page 19
Pausing The Wash Cycle Sequence, Changing The Wash Cycle Sequence
View all Magic Chef MCSCD6W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Speed Soak 3.17 Gallons 45 Minutes 0.66 Gallons 10 Minutes Pre-Wash Pre-Wash Wash Rinse Rinse Pre-Wash PAUSING THE WASH CYCLE SEQUENCE In order to make any changes to the selected wash cycle sequence, load additional items, or remove previously loaded items, the dishwasher must be put into "PAUSE" mode. The dishwasher can be put into "PAUSE" mode at any time during the wash cycle. To temporarily pause the washing process 1) Press and hold the START/RESET button for approximately 3 seconds to cancel the existing program mode. 2) Make the necessary changes to the wash cycle sequence selection or add/remove items from the dishwasher. 3) Ensure that the door is closed and the latch is fully engaged. 4) Press the START/RESET button once. 5) The dishwasher will immediately resume operation using the most recently selected wash cycle sequence. NOTE: The dishwasher will automatically go into PAUSE mode if the door is opened. The door must be closed and the latch engaged for the dishwasher to resume operation. Always use the above steps. CHANGING THE WASH CYCLE SEQUENCE If you need to change the selected wash cycle sequence at any time during the washing process, then follow these steps: 1) Press and hold the START/RESET button for approximately 3 seconds. (The START/RESET indicator light turn on and the unit is now in PAUSE mode). 19