Magic Chef MCSCD6W1 User Manual - Page 25

Problem, Possible Causes, Possible Solution, Cloudiness

Get Magic Chef MCSCD6W1 PDF manuals and user guides View all Magic Chef MCSCD6W1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

PROBLEM POSSIBLE CAUSES POSSIBLE SOLUTION Not enough detergent Use more detergent, or change the type of detergent being was dispensed. used by the dishwasher. The dishes are not clean. Items are blocking the rotation path of the water spray arm. Rearrange the items accordingly so that the spray arm can rotate freely. The filter assembly at the base of the unit is not clean, is clogged, or is not installed correctly. This may clog the spray arm jets. Clean and properly secure the filter into its seat and fit the filter assembly correctly into the unit. Clean the spray arm jets. See the "Care and Maintenance" section of this manual. Cloudiness on the glassware. This is a combination of soft water and too much detergent. Use less detergent if you have soft water, and select a shorter wash cycle sequence to clean the glassware. Black or gray Aluminum utensils marks on have rubbed against dishware. the dishes. Use a mild abrasive cleaner to remove the marks. Detergent left inside the dispenser cups. Dishware blocked the detergent cups, preventing them to open fully during the wash cycle. Rearrange the dishes accordingly and rerun the wash cycle sequence. Improper loading of dishware. See "Loading Dishwasher" section of the user manual. Too little rinse aid. Increase the amount of rinse aid dispensed or refill the rinse aid dispenser if empty. The dishes are not dry. Dishes were removed from the washer too soon. Do not empty your dishwasher immediately after the cycle ends. Open the door slightly, so that the steam can escape. Begin unloading the dishwasher once the dishes are barely warm to the touch. Wrong wash cycle sequence selected. Shorter wash cycle sequences use lower temperatures with lower cleaning performance capabilities. Choose a wash cycle with a longer wash time to resolve this issue. Using cutlery with a low quality coating. Water drainage is more difficult with these items. Cutlery or dishes of this type are not suitable for dishwasher use. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
25
PROBLEM
POSSIBLE CAUSES
POSSIBLE SOLUTION
The dishes
are not
clean.
Not enough detergent
was dispensed.
Use more detergent, or change the type of detergent being
used by the dishwasher.
Items are blocking the
rota°on path of the
water spray arm.
Rearrange the items accordingly so that the spray arm can
rotate freely.
The filter assembly at
the base of the unit is
not clean, is clogged,
or is not installed
correctly. This may clog
the spray arm jets.
Clean and properly secure the filter into its seat and fit the
filter assembly correctly into the unit. Clean the spray arm
jets. See the “Care and Maintenance” sec°on of this manual.
Cloudiness
on the
glassware.
This is a combina°on
of soſt water and too
much detergent.
Use less detergent if you have soſt water, and select a
shorter wash cycle sequence to clean the glassware.
Black or gray
marks on
dishware.
Aluminum utensils
have rubbed against
the dishes.
Use a mild abrasive cleaner to remove the marks.
Detergent
leſt inside
the dispens-
er cups.
Dishware blocked the
detergent cups,
preven°ng them to
open fully during the
wash cycle.
Rearrange the dishes accordingly and rerun the wash cycle
sequence.
The dishes
are not dry.
Improper loading of
dishware.
See “Loading Dishwasher” sec°on of the user manual.
Too li±le rinse aid.
Increase the amount of rinse aid dispensed or refill the
rinse aid dispenser if empty.
Dishes were removed
from the washer too
soon.
Do not empty your dishwasher immediately aſter the cycle
ends. Open the door slightly, so that the steam can escape.
Begin unloading the dishwasher once the dishes are barely
warm to the touch.
Wrong wash cycle
sequence
selected.
Shorter wash cycle sequences use lower temperatures with
lower cleaning performance capabili°es. Choose a wash
cycle with a longer wash °me to resolve this issue.
Using cutlery with a
low quality
coa°ng.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
dishwasher use.