Magic Chef MCSRG24S User Manual 1 - Page 5

INSTALLATION REQUIREMENTS Tools and parts Tools Required Gather the necessary tools and parts before starting the installation. Carefully follow the instructions with the tools and parts required for installation. • Tape Measure • 3/8 Nut Driver • Flat-Head Screwdriver • 1/4 Nut Driver • Phillips Screwdriver • 1/8 (3.2mm) drill bit (wood floors) • Level • Marker or Pencil • Cordless Electric Drill • Masking Tape • Hammer • Pipe-Joint Compound resistant to LP/NG • Wrench or Pliers • 3/16" Carbide-Tipped Masonry Drill Bit (Concrete/Ceramic Floors) • Pipe Wrench • Non-Corrosive Leak-Detection Solution • 10" Adjustable Wrenches (2) Parts Supplied Check that all parts are included. Figure 1 16 x 1-5/8" Screws (2) Anti-Tip Bracket Gas Pipe Adapter with Washer Regulator LP/Natural Gas Conversion Kit Depending on the thickness of flooring, longer screws may be required to anchor the anti-tip bracket to the sub floor. Longer screws should be available at your local hardware store. The anti-tip bracket must be securely mounted to the floor. Parts Needed Check local codes and consult gas supplier. Gas Supply Line Kit Figure 2 Adapter Flexible Gas Supply Line 5 Adapter