Magnavox 15MF400T User Manual - Page 28
Before Call Service - power cord
UPC - 037849966938
View all Magnavox 15MF400T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Before Call Service Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow "Ghost " or double image *This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may inprove the picture. No power *Check that the TV's AC power cord is plugged into the mains socket. *Unplug the TV, wait for 60 seconds. Then re-insert plug into the mains socket and turn on the TV again. No picture Good picture but no sound Good sound but poor color *Check antenna connections at the rear of the TV to see if it is properly connected to the TV. *possible broadcast station trouble. Try another channel. *Adjust the contrast and brightness settings. *Check the Closed Captions control. Some TEXT modes could block the screen. *Check the cable connection *Increase the VOLUME. *Check that the TV is not muted; press the button on the remote control. *Adjust the contrast, color and brightness settings. Poor picture *Sometimes, poor picture quality occurs when having activated an S-VHS camera or camcorder connected and having connected another peripheral at the same time. In this case, please connect power cords of other peripherals to a different power outlet. Snowy picture and noise Horizontal dotted line Television not responding to remote control *Check the antenna connection *This may be caused by electrical interference (e.g. hairdryer, nearby neon lights, etc.) *Turn off the equipment. *Check whether the batteries are working. Replace if necessary *Clean the remote control sensor lens on the TV. *Use the buttons at the front of your TV. 28 Enfocus Software - Customer Support