Magnavox 37MF301B Owners Manual - Page 18

18 Channel List The channels selected here can be skipped when selecting the channels using CH + / −. Those channels can still be selected with the Number buttons. 1 Use ▲/▼ to select [Channel List], then press OK. 2 Use ▲/▼ to select the channel you want to remove, then press OK. Picture Sound Setup Features Language USB Highlight channels for Ch Up / Down key selection. DTV 11.1 DTV 11.2 DTV 11.3 Ch Select OK Watch / Skip BACK Back • The channel display for the removed channel darkens. You will not be able to select the channel again using CH +/−. • To reactivate a removed channel, use ▲/▼ and press OK.The registered channels are highlighted. • When you remove a main channel, its subchannels are removed as well. Note • The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC. Antenna Confirmation ATSC This function lets you check the digital signal strength of each channel. 1 Use ▲/▼ to select [Antenna], then press OK. 2 Use the Number buttons or CH + / − to select the channel for which you want to check the digital signal strength. 11.1 Picture Sound Setup Features Language USB Back Current 50 Max 50 Ch Change Note • If the channel is set to analog channel or external input, you cannot confirm the antenna condition. Features Add Channels This function lets you add the off the air along NTSC or analog Cable channels that were not added by the autoprogram due to reception conditions at the initial setting. 1 Use ▲/▼ to select [Add Channels], then press OK. 2 Use the Number buttons to enter the number of the channel you want to add, then press OK. 11 1 Use ▲/▼ to select the item you want to adjust, then press OK. Picture Sound Setup Features Language USB Closed Caption Child Lock ECO fun-Link (HDMI CEC) Location E-Sticker Current Software Info On Home - - Picture Sound Setup Features Language USB For analog channels, select a channel to be added using number keys. For digital channels, you must perform Autoprogram function. Add channels Ch Change BACK Back Note • If setup completes successfully, [Added to the channel list.] is displayed. • If external input is used, it is not possible to register the channel and [Unavailable] will be displayed on the TV screen. • By using CH+ / −, you can select the memorized channels only. 2 Adjust the following items.