Magnavox MRV700VR User manual, English (US) - Page 72

E9490UD_EN.qx3 04.8.3 11:55 AM Page 72 72 Rerecording (Tape Duplication) These instructions show you how to copy videotapes.The illustration uses two Recorders. Other VCRs or Camcorders may operate differently. 1. Audio cables from AUDIO OUT jacks (red and white) of Recorder 1 to AUDIO IN jacks of Recorder 2 Recorder 1 Playing unit 2. Video cable from yellow VIDEO OUT jack of Recorder 1 to VIDEO IN jack of Recorder 2 Recorder 2 Recording unit 3. RF coaxial cable from the (Antenna) OUT jack of Recorder 2 to the TV's ANTENNA IN jack 1 Make the connections shown above. 2 Recorder 1 will play your tape. Put a prerecorded tape into the cassette compartment of Recorder 1. Press VCR to put the unit in VCR mode if necessary. 3 Recorder 2 will record your tape. Insert a blank tape in the cassette compartment of Recorder 2. Press VCR to put the unit in VCR mode if necessary. 4 Turn on the TV and set it to channel 03. (To use channel 04 instead, see page 10.) 5 Point the remote control at Recorder 2. Press CHANNEL +/- to select EXT2 or CAM1. (See Helpful Hints at right.) 6 Press REC SPEED/MODE to select SP or SLP as the tape recording speed at Recorder 2. 7 Press RECORD I (VCR) on the front of Recorder 2 then press PLAY B (VCR) on the front of Recorder 1. To stop recording, press STOP C / EJECT A (VCR) on Recorder 1, then press STOP C / EJECT A (VCR) on Recorder 2. Helpful Hints • If you use the AUDIO and VIDEO IN jacks on the back of Recorder 2, press CHANNEL +/- to select EXT2 at step 5. EXT2 will appear on the TV screen. • If you use the AUDIO and VIDEO In jacks on the front of Recorder 2, press CHANNEL +/- to select CAM1 at step 5. CAM1 will appear on the TV screen. • Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • If a program has copyright protection, it may not record clearly.