Magnavox MWD2206 Owners Manual - Page 14

Copying a Video Tape Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. (Back of TV) (Back of another source) (Back of DVD/VCR*) or COMPONENT VIDEO OUT Y DVD/VCR VCR AUADIUO ODUITO OUT L AUDIO IN CB R VIDVEOIDOUETO OVIUDETO IN CR 1ANT-IN DIGITAL AUDIO OUT Connect DVD AUSD-VIOIDEO OUOTUT COMPONENT VIDEO OUT Y DVD/VCR AUDIO OUT L VCR L AUDIO IN ANT-OUT COAXIAL R CB R VIDEO OUT VIDEO IN CR Audio/Video cables (commercially available) 2 ANT-IN Connect ANT-OUT RF cable (supplied) *Front input jacks are also available 1) Insert a pre-recorded tape into another VCR for playing. 2) Insert a tape with its record tab into this unit for recording. ) Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP). 4) Select the "L1" or "L2" position on the recording unit. • To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or [CHANNEL K/L] on this unit. • To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or [CHANNEL K/L] on this unit. 5) Press [RECORD] on the recording unit. 6) Begin playback of the tape in another source. 7) To stop recording, press [STOP/EJECT C A] on the recording unit, then stop playback of the tape in another source. Hint • For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source's operation. • Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended. • You can use a video disc player, satellite receiver or other audio/video component with Audio / Video outputs. • "L1" or "L2" is found before the lowest memorized channel. (Example: CH02) • "L2" input jacks are on the front of this unit. VCR Functions - 14 - EN