Magnavox W-10CR Window AC Owners Manual - Page 10
Additional Things You Should Know
View all Magnavox W-10CR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
AIR CONDITIONER FEATURES(CONTINUED) FOLLOW ME FEATURE: (only on some models) Auto Cool Dry Fan Clean Air Auto Low Med High Mode Fan Follow Me Energy Saver On/Off Light flashing NOTE: This feature can only be activated from the remote control . The remote control serves as a remote thermostat allowing for the precise temperature control at its location. To activate the Follow Me feature, point the remote control towards the unit and press the Follow Me button. The remote display shows the actual temperature at its location. The remote control will send this signal to the air conditioner every 3 minutes interval until press the Follow Me button again. If the unit does not receive the Follow Me signal during any 7 minutes interval, the unit will keep to indicate the Follow Me mode has ended. ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. The Cool circuit has an automatic 3 minute time delayed start if the unit is turned off and on too abruptly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time. The unit can show the temperature in Fahrenheit or Celsius. To convert from one to the other, press and hold the LEFT and RIGHT TEMP/TIMER buttons at the same time, for 3 seconds. Fresh Air Vent Control(on 10000~12000Btu/h models): The Fresh Air Vent allows the air conditioner to: 1. Recirculate inside air - Vent Closed ( See Fig.A) 2. Draw f resh air i nto the r oom- Vent Open ( see Fig.B) 3. Exchange air from the room and draws fresh air into the room - Vent and E xhaust Open ( see Fig.C) Fig. A (VENT CLOSED) Fig. B (VENT OPEN) Fig. C (VENT &EXHAUST OPEN) 9