Magnavox W-10CR Window AC Owners Manual - Page 8

AIR CONDITIONER FEATURES(CONTINUED) TO USE THE ENERGY SAVER FEATURE: Auto Cool Dry Fan ClAeiarn Auto Low Med High Mode Fan Energy Saver FoMlleow On/Off DO THIS: Press the button SLEEP FEATURE: Temp Temp Timer Timer On Off Check Filter Timer Sleep Auto Cool Dry Fan Clean Air Auto Low Med High DO THIS: Press SLEEP button During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. In Fan only mode ,the temperature is not adjusted. To operate on DRY mode: In this mode, the air conditioner will generally operate as a dehumidifier. In a closed or sealed space, some degree of cooling will continue. NOTE:(ENERGY SAVER button) Press Energy Saver button to initiate this function. This function is available on COOL mode.The fan will continue to run for 3 minutes after the compressor shuts off.The fan then cycles on for 2 minutes at 10 minutes intervals until the room temperature is above the set temperature, at which time the compressor turns back on and cooling starts. NOTE: (SLEEP button) In this mode the selected temperature will increase by one degree, 30 minutes after the mode is selected. The temperature will then increase by another one degree after an additional 30 minutes. This new temperature will be maintained for 6 hours before it returns to the originally selected temperature. This ends the Sleep mode and the unit will continue to operate as originally programmed. The Sleep mode program can be cancelled at any time during operation by pressing the SLEEP button again. 7