Magnavox W-10CR Window AC Owners Manual - Page 9
Timer: Auto Start, Stop Feature, Check Filter Feature, Clean Air Feature, Only On Some Models,
View all Magnavox W-10CR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
AIR CONDITIONER FEATURES(CONTINUED) TIMER: AUTO START/ STOP FEATURE: Temp Temp Timer Timer On Off Check Filter Timer Sleep DO THIS: Press TIMER button Auto Cool Dry Fan Clean Air Auto Low Med High CHECK FILTER FEATURE: NOTE:(TIMER button) - Press the TIMER button, and the TIMER ON indicator light will illuminate to indicate that the AUTO START program is initiated. - Press the TIMER button again to show the TIMER OFF indicator light which indicates that the AUTO STOP program is initiated. - Press or hold the UP or DOWN button to change the timer duration by 30 minute increments, up to 10 hours then at 1 hour increments up to 24 hours.TThhee ccoonnttrrwoollill will count down the time remaining until start. The selected time will register in 5 seconds, and the system will automatically revert back to display the previous temperature setting or room temperature when the unit is on.(when the unit is off, there is no display.) - Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto START/ STOP program. Temp Temp Timer Timer On Off Check Filter Timer Sleep DO THIS: Press CHECK FILTER button Auto Cool Dry Fan Clean Air Auto Low Med High CLEAN AIR FEATURE: (only on some models) Temp Temp NOTE:(CHECK FILTER button) This feature is a reminder to clean the Air Filter for more efficient operation. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the Check Filter button and the light will go off. NOTE:(CLEAN AIR button) Press the CLEAN AIR button,the ion generator is energized and will help to remove pollen and impurities from the air, and trap them in the filter. Timer Timer On Off Check Filter Timer Sleep Auto Cool Dry Fan Clean Air Med High DISPLAYS: Temp Timer Temp Timer On Off DO THIS: Press CLEAN AIR button Displays DISPLAYS: Shows the set temperature in OC or OF and the AUTO-TIMER settings. While in oFnalny omlnoydem,oitde, it shows the room temperature. Error codes: AS-Room temperature sensor error. -Unplug the unit and plug it back in. lf error repeats, call for service. NOTE:In Fan only mode, it will display LO or HI . -Evaporator temperature sensor error. -Unplug the unit and plug it back in. lf error repeats, call for service. NOTE: is displayed as shown in the left diagram. HS--Electric heating sensor error. -Unplug the unit and plug it back in. lf error repeats, call for service. 8