Makita HR2641X1 HR2631F Instruction Manual - Page 5

FUNCTIONAL DESCRIPTION 1. Lamp CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. 1. Switch trigger 2. Lock button 015336 1 2 1. Switch trigger 2 2. Lock button 1 015337 To turn on the lamp, pull the trigger. Release the trigger to turn it off. NOTE: • Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. • Do not use thinner or gasoline to clean the lamp. Such solvents may damage it. Reversing switch action CAUTION: • Always check the direction of rotation before operation. • Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. 1 015360 To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger, push in the lock button and then release the switch trigger. To stop the tool from the locked position, pull the switch trigger fully, then release it. Lighting up the lamps For Model HR2631F, HR2631FT CAUTION: • Do not look in the light or see the source of light directly. For Model HR2631F, HR2631FT, HR2630, HR2630T CAUTION: • If the switch trigger can not be depressed, check to see that the reversing switch is fully set to position (A side) or (B side). 1. Reversing B switch lever A 1 015338 This tool has a reversing switch to change the direction of rotation. Move the reversing switch lever to the position (A side) for clockwise rotation or the position (B side) for counterclockwise rotation. 5