Makita XRM11 XRM11 Instruction Manual - Page 11
Equalizer function, Playing music via auxiliary, input socket, MAINTENANCE, SPECIFICATIONS
View all Makita XRM11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
●● To disconnect all connections and exit the multiple speakers group, press and hold the Plus button of the master speaker. Equalizer function 1. Press the Power button to switch on your speaker. 2. Press the EQ control button to select your required mode (FLAT/JAZZ/ROCK/CLASSIC/POP/NEWS). 3. To set up the bass, middle and treble, press the EQ control button until "Bass" flashes on the display. 4. Press the Volume up/down button to select your required bass level. Press the EQ control button to confirm the setting and enter the "Mid." (Middle) setting. 5. Press the Volume up/down button to select your required middle level. Press the EQ control button to confirm the setting and enter the "Tre." (Treble) setting. 6. Press the Volume up/down button to select your required treble level. Press the EQ control button to confirm the setting. Playing music via auxiliary input socket A 3.5mm Auxiliary input socket is provided on the right side of the unit to permit an audio signal to be fed into the unit from any devices that features a headphone or audio output, such as MP3 or CD player. 1. Connect a stereo or mono audio source (for example, MP3 or CD player) to the Auxiliary input socket (marked 'AUX IN'), the speaker will be switched from Bluetooth to auxiliary input mode. 2. Adjust the Volume control on your MP3 or CD player to ensure an adequate signal and then adjust the volume on the speaker for comfortable listening. Note: To have the better sound quality, we recommend setting the volume to more than two-thirds level on your audio device and then adjust the volume on the speaker as required. The display does not show the information such as title, artist, album, etc., when playing via auxiliary input socket. SPECIFICATIONS Amplifier Output power Frequency response Aux In Input sensitivity Speaker Main speaker Tweeter speaker 10.8V-12Vmax: 3.5W 14.4V: 6W 18V: 10W 50Hz~20kHz 250mVrms @100Hz 101.6mm 8ohm 10W 36mm 8ohm 10W Bluetooth® (The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.) Bluetooth version 5.0 Certified Bluetooth Profiles A2DP/SCMS-T/AVRCP Transmission Power Power Class2 Transmission Range Optimum: Max.10 meters (33 feet) Possible: Max.30 meters (100 feet) (varies according to usage conditions) Supported codec SBC Compatible Bluetooth profile A2DP/AVRCP Maximum speakerfrequency power BT EDR: 3.08dBm BT LE: 3.88dBm Operating Frequency 2402MHz~2480MHz USB charging socket Maximum supplying power of USB socket 5V, 2.1A MAINTENANCE General CAUTION: ●● Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. ●● Do not wash the speaker with water. AC power adaptor Battery DC in 12V 1.5A, center pin positive Slide battery: 10.8V-12Vmax 14.4V 18V Dimensions(W x H x D) 206mm × 199mm × 217mm Weight 2.7KG (without battery) The company reserves the rights to amend the specification withour notice. 11 ENGLISH