Makita XRM11 XRM11 Instruction Manual - Page 7
Installation And Power, Supply
View all Makita XRM11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INSTALLATION AND POWER SUPPLY CAUTION: ●● Be careful not to pinch your fingers when opening and closing the battery cover. ●● Return the battery compartment locker to the original position, after installing or removing battery cartridge. If not, battery cartridge may accidentally fall out of the speaker, causing injury to you or someone around you. ●● Always close and lock the battery compartment locker before moving the speaker. ●● Always switch off the speaker before installing or removing the battery cartridge. ●● Be careful not to drop or strike the speaker. Broken shell may slash your finger or stab your body. Damaged speaker may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. ●● Hold the speaker and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the speaker and the battery cartridge firmly may cause them to slip off your hands and result in damage to the speaker and battery cartridge and a personal injury. IMPORTANT: ●● Reduced power, distortion, "stuttering sound" or "low battery" appear on the display are all the signs that the main battery pack needs to be replaced. ●● The battery cartridge can't be charged via the supplied AC power adaptor. ●● The battery cartridge is not included as standard accessories. Installing or removing slide battery cartridge (Fig. 3 and 4) ●● To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. ●● If you can see the red indicator on the upper side of the button, it is not locked completely. Install it fully until the red indicator cannot be seen. If not, it may accidentally fall out of the speaker, causing injury to you or someone around you. ●● Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. ●● To remove the battery cartridge, sliding it from the speaker while pressing the button on the front of the cartridge. Indicating the remaining battery capacity * Only for battery cartridges with "B" at the end of the model number 1 2 1. Indicator lamps 2. Check button Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for few seconds. ●● 14.4V/18V batteries Indicator or lamps Remaining Capacity Lighted Off Blinking 75% ~ 100% 50% ~ 75% 25% ~ 50% 0% ~ 25% Charge the battery The battery may have malfunctioned ●● 10.8V-12Vmax batteries Indicator or lamps Remaining Capacity Lighted Off Blinking 75% ~ 100% 50% ~ 75% 25% ~ 50% 0% ~ 25% 7 ENGLISH