Makita XRM11 XRM11 Instruction Manual - Page 9

●● If "XRM11" shows in your Bluetooth device list but your device cannot connect with it, please delete the item from your list and pair the device with the speaker again following the steps described previously. ●● Optimum Bluetooth streaming range is roughly 10 meters (30 feet) (line of sight) to the speaker but distance up to 30 meters (100 feet) are possible. ●● If Bluetooth connection is lost due to exceeding time of separation, exceeding the optimum distance, obstacles or otherwise, reconnecting your device with the speaker may be necessary. ●● Physical obstacles, other wireless devices or electromagnetic devices may affect the connection quality. ●● Bluetooth connectivity performance may vary depending on the connected Bluetooth devices. Please refer to the Bluetooth capabilities of your device before connecting to the speaker. All features may not be supported on some paired Bluetooth devices. Playing audio files in Bluetooth mode When you have successfully connected the speaker with the chosen Bluetooth device you can start to play your music using the controls on your connected Bluetooth device. 1. Once playing has started adjust the volume to the required setting using the Volume buttons on the speaker or on your enabled Bluetooth device. 2. Use the controls on your Bluetooth device to play/ pause and navigate tracks. Alternatively, control the playback using Play/Pause, Next track and Previous track buttons on your speaker. 3. Press and hold the Fast-forward button or Rewind button to move through the current track. Release the button when the desired point is reached. Note: ●● Not all player applications or devices may respond to all of these controls. ●● Some mobile phones may temporarily disconnect from the speaker when you make or receive calls. Some devices may temporarily mute their Bluetooth audio streaming when they receive text messages, emails or for other reasons unrelated to audio streaming. Such behavior is a function of the connected device and does not indicate a fault with the speaker. ●● The display will show the track information such as title, artist, album, etc., when playing in Bluetooth mode. Playing a previously-paired Bluetooth source device The speaker can memorize up to 8 sets of paired device, when the memory exceed this amount, the oldest pairing history will be over written. If your Bluetooth device already paired with the speaker previously, the unit will memorize your Bluetooth device and it attempts to reconnect with a device in memory which is last connected. If the last connected device is not available, the speaker will be discoverable. Disconnecting your Bluetooth device Press and hold the Bluetooth pairing button for 2-3 seconds until "Pairing" is shown on the display to disconnect with your Bluetooth device or turn off Bluetooth on your Bluetooth device to disable the connection. Deleting Bluetooth paired device memory To clear the memory of all paired devices, press and hold the Bluetooth pairing button for more than 5 seconds until you hear two beeps. TRUE WIRELESS STEREO (TWS) FUNCTION True wireless stereo (TWS) is a feature that allows one device to wirelessly connect with another device. You can use the TWS function to connect it to a second XRM11 and play your music through two speakers. Set up the first speaker 1. Make sure the first speaker is in Bluetooth mode and connect to a Bluetooth device. 2. Press the Plus button, the display will show ST . MULTI ST will flash on the display. Press the Plus button to enter the "ST Pair" mode. If no buttons are pressed for 10 seconds, the speaker will also enter the "ST Pair" mode. The display will show "ST Pair" and "Pair" will flash 1 minute. Set up the second speaker 1. Make sure a second speaker is in Bluetooth mode. 2. Press the Plus button, the display will show ST . MULTI ST will flash on the display. Press the Plus button to enter the "ST Pair" mode. If no buttons are pressed for 10 seconds, the speaker will also enter the "ST Pair" mode. When the connection is successful, L - ST - R will be shown on both displays at the same time. The EQ setting will revert to Flat mode (initial setting). Note: Set up the second speaker within 1 minute. If you do not set it up within 1 minute, the setting of the first speaker will be canceled. Start playback 1. Start playback on the connected Bluetooth device and adjust the volume on the Bluetooth device or one of the speakers for comfortable listening. 9 ENGLISH