Makita XRM11 XRM11 Instruction Manual - Page 6

Operating Time

Page 6 highlights

For United States: Cautions to the user The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statements IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●● Reorient or relocate the receiving antenna. ●● Increase the separation between the equipment and receiver. ●● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●● Consult the dealer or an experienced radio/TV technician for help. OPERATING TIME * The suitable battery packs for this radio listed as the following table. * The following table indicates the operating time on a single charge. Battery capacity Battery cartridge voltage 10.8V-12Vmax 18V AT SPEAKER OUTPUT = 100mW Unit: Hour (Approximately) Bluetooth AUX IN BL1016 8.5 9.5 1.5Ah BL1815N 7.5 8.5 BL1021B 11 12 2.0Ah BL1820B 10 11 3.0Ah BL1830 BL1830B 14 16 BL1041B 22 25 4.0Ah BL1840B 20 22 5.0Ah BL1850B 26 29 6.0Ah BL1860B 32 35 WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. NOTE: ●● Table regarding to the battery operating time above is for reference. ●● The actual operating time may differ with the type of the battery, charging condition, or usage environment. 6 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21

6
ENGLISH
OPERATING TIME
* The suitable battery packs for this radio listed as the following table.
* The following table indicates the operating time on a single charge.
Battery capacity
Battery cartridge voltage
AT SPEAKER OUTPUT = 100mW
Unit: Hour (Approximately)
10.8V–12Vmax
18V
Bluetooth
AUX IN
1.5Ah
BL1016
8.5
9.5
BL1815N
7.5
8.5
2.0Ah
BL1021B
11
12
BL1820B
10
11
3.0Ah
BL1830
BL1830B
14
16
4.0Ah
BL1041B
22
25
BL1840B
20
22
5.0Ah
BL1850B
26
29
6.0Ah
BL1860B
32
35
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire.
NOTE:
Table regarding to the battery operating time above is for reference.
The actual operating time may differ with the type of the battery, charging condition, or usage environment.
For United States:
Cautions to the user
The changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
RF exposure statements
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance
requirements, the antenna (s) used for this transmitter
must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or
transmitter. No change to the antenna or the device
is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the
device.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.