Makita XRT01TK XRT01 Instruction Manual - Page 14
Maintenance
View all Makita XRT01TK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
• Avoid strumous sections of rebars. • If tying strength is insufficient, change the tying orientation and perform tying twice so that tying strength increases. NOTICE: When you make the second tie, bend the tail of the first tie before making the second tie. Otherwise, the wire may be repelled a second time. It may cling to the tool tip, and the hook may be damaged. Replacing the tie wires CAUTION: When you replace the wire, be sure to turn the power off, lock the trigger, and remove the battery cartridge. Failure to do so may cause an accident. 1. When wire has been used up, an error tone will sound and error "1" will be displayed. 2. Lock the trigger, turn the power off, and remove the battery cartridge. 3. Push the release lever, and lock it with the lock lever. 1 4. Remove the wire reel from the tool. NOTE: When wire has been used up normally, approximately 20 cm (8") of the wire remains wound on the reel. In this state, replace the wire reel with a new one. If it is difficult to remove the wire reel from the tool, follow the steps below. 1. Insert the battery cartridge into the tool, and turn the power on. The tool feeds the wire and cuts it automatically. 2. Lock the trigger, turn the power off, and remove the battery cartridge. 3. Remove the wire breaks using tools such as nippers or pliers. MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Storage of the hex wrench Store the hex wrench in the position shown in the figure. 1 ► 1 . Hex wrench 2 ► 1 . Release lever 2. Lock lever 14 ENGLISH