Marantz SR5004 SR6004 / SR5004 User Manual - English - Page 37

CONNECTIONS FUNCTIONS NAMES AND BASIC BASIC OPERATION ADVANCED CONNECTIONS ENGLISH 4 VIDEO SETUP Video settings are made as follows. 1. Select "Video Setup" from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button. SR6004 Video Setup Video Convert OSD Information HDMI Output HDMI Output Resolution Component Output Component I / P Convert : Enable : Output1 : Auto : Main Zone : Disable Return : Up / Down : Video Setup Video Convert OSD Information HDMI Output Resolution Component I / P Convert Enter : Select Exit : Exit SR5004 : Enable : Auto : Disable Return : Up / Down : Enter : Select Exit : Exit 2. Select the desired menu with the 3 or 4 cursor buttons and press the ENTER button. • Video Convert This unit is equipped to convert video signals for monitor output. This section explains how to set up conversion for each type of video input. 1. Select "Video Convert" with the 3 or 4 cursor buttons and press the ENTER button. Video Convert BLU-RAY DVD VCR DSS TV CD/CDR AUX M-XPort : Analog & HDMI : Analog & HDMI : Analog & HDMI : Analog & HDMI : Analog & HDMI : Analog & HDMI : Analog & HDMI : Analog & HDMI Return : Up / Down : Change Enter : Exit : Exit 2. Select "Function" with the 3 or 4 cursor buttons and set the video conversion mode with the 1 or 2 cursor buttons. Analog&HDMI: This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). Furthermore, it up-converts from analog video signal to HDMI. (It cannot downconvert from HDMI digital video signals to analog video signals.) Analog Only: This mode both up-converts and down-converts analog video signals (Composite Video, S-Video, Component Video). It does not up-convert to HDMI. Off: This mode turns off all conversion features. Note • For details on video convert feature, see page 43. • OSD Information Select the OSD information function to "Enable" or "Disable" with the 1 or 2 cursor buttons. If you select "Enable", this unit will display the status of the feature (Volume up/down, input select, etc..) on the monitor. If you do not desire this information, select "Disable". Note • OSD information is not output to Monitor Output of HDMI and Component Video. However, OSD information is output if the Video Convert function is used to output Video video signals to Monitor Out of HDMI and Component Video. For details, refer to"Video Convert"on page 44. • HDMI Output (SR6004 only) This setting is for selecting which output terminal, HDMI 1 or HDMI 2, to output the signal to. Select the output destination with the 1 / 2 cursor buttons. • HDMI Output Resolution Selects the resolution of the video signal output from the HDMI terminal of this unit. Select from the following using the 1 or 2 cursor buttons. Auto ↔ Through ↔ 480p/576p ↔ 720p ↔ 1080i ↔ 1080p ↔ Auto ↔ ... • Component Output (SR6004 only) This setting is for selecting whether to output the images for the main zone or the images for the zone system to the COMPONENT MONITOR OUT terminal. Select the output destination between Main Zone and Zone A with the 1 / 2 cursor buttons. • Component I/P Convert Set whether or not to convert 480i/576i signals to 480p/576p signals when outputting the analog video input signal input from the VIDEO terminals or COMPONENT terminals. Select "Enable" or "Disable." Disable: Do not convert Enable: Convert SETUP Notes • This setting is enabled only when Video Convert is set to other than Off. • When a monitor is connected to the HDMI MONITOR OUT terminal, and HDMI RESOLUTION is set to 720p, 1080i, 1080p, or AUTO, the I/P CONVERT for COMPONENT VIDEO OUTPUT does not function. After you complete this portion of the setup, move cursor to "Return" with the 3 or 4 cursor buttons and press the ENTER button. SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS 35