Marantz SR6001 SR6001 User Manual - Page 22
Hdmi Jack, Connecting Hdmi Devices - manual
View all Marantz SR6001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HDMI JACK This SR6001 has two HDMI inputs and one HDMI output. The unit can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. The SR6001 is also capable of converting analog video signals (Composite Video, S-Video, Component Video) for HDMI output. Select an input source from the OSD menu system. (See page 29, 40) Notes: • When the HDMI output is connected to a display monitor that does not support HDCP, signals are not output. To view images in HDMI, it is necessary to connect to a display that supports HDCP. • There may be no image output if connected to a TV or display that is not compatible with the above format. • Refer to the instruction manual of the TV or display to be connected to the SR6001 for detailed information regarding the HDMI terminal. * HDCP: High-bandwidth Digital Content Protection CONNECTING HDMI DEVICES An HDMI cable (sold separately) is used to connect the HDMI jack on the SR6001 with the HDMI jack on a DVD player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected player must support multichannel audio transmission through its HDMI jack. HDMI video streaming is compatible with DVI in principle. Therefore, it is possible to connect to a TV or monitor that has a DVI terminal using an HDMI-DVI conversion cable or plug. When connecting to a DVI terminal, connect the audio signal separately. Notes: • Some HDMI components can be controlled over the HDMI cable, but this receiver cannot control other components this way. • When connected to a monitor (i.e., TV, projector, etc.) that does not support HDCP, video and audio are not output. • DVI cables come with 24-pin and 29-pin plugs. This receiver supports 24-pin DVI-D cables; 29-pin DVI cables cannot connect to it. • Some source devices such as DVD players or set top box do not support HDMI repeater operations like those of the SR6001. In such case, pictures are not properly projected on monitors such as TVs and projectors. • When multiple components are connected to this receiver, turn power to unused components off to prevent interference between them. • Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before disconnecting or connecting cables. • Some DVD-Audio disks disable downmixing. These types of disks are not played back correctly unless the left, center, right and surround left and right speakers, and subwoofer are connected. • If a DVD player that does not support HDMI 1.1 is connected to the SR6001, multi channel PCM playback is not possible even with DVD-Audio disks. • If an Super Audio CD player that does not support HDMI 1.2 is connected to the receiver, DSD playback is not possible even with Super Audio CD. (*DSD: Direct Stream Digital) • If a DVD player or other device with DVI output is connected to the SR6001, a separate audio cable (optical-digital, coaxial digital or analog) is needed for the audio signals. In this case, select the connected audio input as explained in "1-1 FUNC INPUT SETUP". (See page 29) • Multi channel PCM signals and audio signals of 62 kHz or higher that are input from the HDMI jack are not output from the DIGITAL OUT jacks. • Depending on the quiality of the cable used, the HDMI signal may be affected by noise. DVD player HDMI OUTPUT VIDEO PROJECTOR HDMI INPUT INPUT 1(TV) INPUT 2(DVD) OUTPUT FM (75) GND AM ANTENNA COMPONENT Y CB/PB CR/PR Y CB/PB CR/PR Y CB/PB CR/PR VIDEO INPUT 3(VCR) INPUT 4(DSS) INPUT 1(DVD) INPUT 2(DSS) OUTPUT HDMI Ver1.2 TV(1) DVD(2) VCR(3) IN OUT DSS(4) MONITOR OUT TV(1) DVD(2) VCR(3) DSS(4) MONI. OUT MODEL NO. SR6001 RS-232C XM AC IN SURROUND BACK L R MULTI SPEAKER / SPEAKER C VIDEO 4 DIGITAL IN 5 DIGITAL OUT RC-5 MULTI RC COAX. IN 1 2 3 TV DVD VCR OPT. DSS OUT TAPE DC OUT IN OUT L FLASHER IN R CD/CD-R MULTI L S-VIDEO SL SBL C PRE OUT SR SBR SW SL SBL C L 7.1CH IN R IN OUT IN OUT IN OUT OUT AUDIO R SR (AUX2) SBR SW UNSWITCHED 1.25A 150W ON OFF SWITCHED 1.25A 150W AC OUTLETS 120V 60Hz SPEAKER SYSTEMS L R FRONT A L FRONT B R CEN TER L SURR OUND R FRONT A OR B.CENTER.SURR. SURR BACK : 6 - 8 OHMS FRONT A + B : 8 OHMS SATELLITE TUNER HDMI OUTPUT 19 ENGLISH