Marantz VP8600BL VP8600 User Manual - Page 13

ENGLISH COMPONENT 1: SCART When connecting the COMPONENT 1 terminal to the SCART (RGB) out terminal, set COMPONENT 1 settings to [SCART]. ( P.19) Scart to RGBCS cable (commercially available) Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC You can connect this projector to HD-Video /PC using RGB IN port, or DVD Player/Satellite /Cable Tuner /PC using DVI-D IN port. 1. Connect one end of the RGB cable to the RGB IN port, or one end of the DVI-D cable to the DVI-D IN port on the projector. 2. Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal computer. SCART CONNECTOR STANDBY FL OFF DVD Player COMPONENT 1: RGB When connecting the COMPONENT 1 terminal to the RGB HV out terminal, set COMPONENT 1 settings to [RGB]. ( P.19) 5RCA cable (commercially available) VHRBG MONITOR OUT PC Note : When projecting a video image from a device connected to the DVI-D terminal, follow the procedure below. 1. Turn on power of this unit. 2. Set the input video source to DVI-D input. 3. Turn on power of the device connected to the DVI-D terminal of the unit (i.e. DVD player). If the procedure above is not followed, projected image may corrupt. For the details of the DVI-D terminal on the device connected with the unit, see the instruction manual of the device. RGB (D-Sub monitor) cable (commercially available) RGB out RGBoorrOUT DDVVII--DD oouutt or HDMI out HD-Video / Satellite / Cable Tuner / DVD Player Monitor output RRGGBB OoUuTt oorr DDVVI-I-DD oouutt DVI-D cable (commercially available) IBM VGA or Compatible PC 8