Marantz VP8600BL VP8600 User Manual - Page 18

ENGLISH The Screen Images in a 4:3 screen To Turn off the Power • Press the NORMAL button on the remote controller for the 4:3 aspect ratio video source. • Press the FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. • Press the FULL, ZOOM 1 or ZOOM 2 button on the remote controller for the squeezed video source. ❖ Original Source Image 16 : 9 video source 4 : 3 video source 1. Press the STANDBY button on the remote controller. The projector turns off. 2. The fan continues running for about 1 minute to internally cool the projector. In the meantime, the Power LED on the projector flashes a blue color and buttons on the remote control are irresponsive to touch. Once the fan stops, the Power LED blinks (blue) slowly to indicate the projector is on standby. 3. Turn off the main power switch. ❖ Full mode The 16:9 squeezed image is displayed with the correct aspect. The 4:3 image is enlarged horizontally. STANDBY ON COMP.1 C1 COMP.2 S VIDEO C2 S FULL F DVI DV1 RGB RGB VIDEO NORMAL V N THEATER STANDARD DYNAMIC ZOOM1 THTR STD DYN Z1 LOW-BRIGHT- HIGH LB HB C-TEMP ZOOM2 CT Z2 ❖ Normal mode ❖ Zoom 1 mode The picture in normal ratio 4:3 is displayed. Notes : - Do not pull out the AC power cord until the projector turns in standby mode. - Do not pull out the power cord suddenly in the state of "POWER ON." It can cause a breakdown. - When a error message blinks, turn off the main power switch after checking that the fan has stopped. - The projector will not be turned on if the ON button on the remote controller is pressed immediately after turning off. Press the ON button on the remote controller after the projector turns into standby mode. ❖ Zoom 2 mode 13