Marantz VP8600BL VP8600 User Manual - Page 15

ENGLISH INITIAL SETTING Turning on the Power 1. Connect the mains cord to the projector. Connect the other end to a wall outlet. Turn on the main power switch. The Power LED blinks (blue) slowly. 2. Remove the lens cover. 3. Turn on the connected devices. 4. Press the ON button on the remote controller to turn on the projector. The Power LED lights blue and the projector splash screen displays. STANDBY ON COMP.1 C1 COMP.2 S VIDEO C2 S FULL F DVI DV1 RGB RGB VIDEO NORMAL V N THEATER STANDARD DYNAMIC ZOOM1 THTR STD DYN Z1 LOW-BRIGHT- HIGH LB HB C-TEMP ZOOM2 CT Z2 5. Press the INPUT 3 or INPUT 4 key to select the input signal source. 10 V-MUTE MENU M INPUT F FREEZE E EXIT ON/OFF PIP INPUT SWAP MENU CONTRAST CON- CON+ BRIGHTNESS BRI- BRI+ Adjust the Zoom, Focus and Keystone 1. Use the ZOOM ring (on the projector) to resize the projected image and screen size. 2. Use the FOCUS ring (on the projector) to sharpen the projected image. FOCUS RING ZOOM RING 3. Press MENU on the remote control to open the OSD. 4. Press 34 to select Config. and then press ENTER. 5. Press 1 2 to adjust the horizontal keystone and then press ENTER. 6. Press 1 2 to adjust the vertical keystone and then press ENTER. 7. Press the EXIT button twice to close the OSD. 4 V-MUTE MENU 3 M INPUT F E 5, 6 FREEZE EXIT 7 PIP