Maytag CWG3100AAE Installation Instructions - Page 10
Natural Gas Conversion - oven manual
UPC - 719881043210
View all Maytag CWG3100AAE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3. Flip the regulator pin over and snap pin firmly into place. A B A. Natural gas position B. LP gas position 4. Screw the hex-shaped regulator cap securely back into place. Do not overtighten. To Convert Bake/Broiler Burner 1. Remove racks from inside the broiler cavity. 2. Screw the burner orifice hood down tight against the pins. Do not overtighten. Natural Gas Conversion 1. Turn manual shutoff valve to the closed position. 2. Unplug oven or disconnect power. B A C A. To oven B. Shutoff valve (closed position) C. Gas supply line To Convert Gas Pressure Regulator 1. Locate gas pressure regulator in bottom compartment. AB C G A A. Burner orifice hood NOTE: On units using Eaton Oven Safety Valve, screw the valve orifice hood down tight against the valve body. It is important that the hood be turned down as far as it can go to ensure complete conversion has occurred. 3. Adjust burner air shutter to the widest opening that will not cause the flame to lift or blow off the burner when cold. F E D A. Gas pressure regulator B. Gas supply line C. Electrical disconnect D. Serial plate E. Manual oven valve F. Burner rating plate G. Manifold pressure tap IMPORTANT: Do not remove the gas pressure regulator. 10