Maytag M8TXEGFBW Use & Care Guide - Page 7
Reverse Doors and Hinges optional, Reverse Center Hinge
View all Maytag M8TXEGFBW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. Open refrigerator door and remove base grille from the bottom front of the refrigerator. A Reverse Doors and Hinges (optional) IMPORTANT: Your refrigerator has handles that either extend from the door or cup handles which are recessed into the doors. If your model has cup handles, disregard instructions pertaining to moving the handles to the opposite side. ■ See complete graphics later in these instructions. A. Clips 6. Using a hex head socket wrench, remove the two hex head hinge screws attaching the bottom hinge to the cabinet and remove the hinge from the bottom of the refrigerator door. NOTE: For 21 cu ft models, remove both the Bottom Hinge assembly and the leveling foot. 7. Lower the refrigerator door from the Center Hinge. 8. Remove the washer from the bottom of the Center Hinge pin. A Round-Head Handle Screw Door Handle Screw Hole Plug Reverse Center Hinge 1. Remove the three screws (that match the exterior finish) from the handle side and use them to fill the holes created when the hinge screws were removed. A A. Screws matching exterior finish 2. Using the three hex head hinge screws, removed in Step 9, insert two screws halfway into the holes, leaving space to insert the Center Hinge. 3. Slide the center hinge, from the right, onto the screws, insert the third screw, and tighten all screws completely. NOTE: Make sure the washers are in place on both the top and bottom pins of the center hinge. A. Washer 9. Using a hex head socket wrench, remove the three screws from the center hinge and remove the hinge. Set aside. A A B A. Center hinge B Hex head hinge screws B A A Hex head hinge screws B. Washers 7