Maytag M8TXEGFBW Use & Care Guide - Page 9
Reverse Top Hinge
View all Maytag M8TXEGFBW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Slide the handle upward to release it from the keyhole slot and pull the handle away from the door. A B 8. Fasten the top of the refrigerator handle to the top of the refrigerator door. A A. Flat-head handle screws B. Refrigerator door handle 5. Remove the decal covering the hole on the opposite side of the door, where the refrigerator door handle will be installed, and discard the decal. A. Flat-head handle screws 9. Cover the remaining hole with the decal (provided). 6. Remove the shoulder screw from the left-hand side of the door and fasten it into the hole in the door that was behind the decal. 7. Align the keyhole slot in the handle mounting bracket with the shoulder screw. Position the handle so that the mounting base is flush against the door. Slide the handle downward until it locks into place. A 10. Tighten all screws. Set aside refrigerator door until bottom hinge is installed on the opposite side of the refrigerator. NOTE: For 21 cu ft models, transfer both the bottom hinge assembly and the leveling foot to the opposite side. Reverse Top Hinge 1. Remove the screw attaching the hinge pin to the hinge. Turn the hinge over so that it is pointing in the opposite direction. 2. Place the plastic spacer beneath the hinge so that it will be between the hinge and the cabinet, making sure the holes are aligned. B B B A. Flat-head handle screws B. Refrigerator door handle A C C A A. Plastic spacer B. Hinge pin screw C. Hinge pin 3. Fasten the Top Hinge to the opposite side of the cabinet, inserting the screws only halfway, so you will be able to replace and align the freezer door later. A B C A Hex head hinge screws B. Top hinge pin C. Plastic spacer 9