Maytag M8TXEGFBW Use & Care Guide - Page 8
Reverse Freezer Door, Reverse Refrigerator Door
View all Maytag M8TXEGFBW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Reverse Freezer Door 1. Remove the three cabinet hole plugs from the top of the cabinet and place them in the hinge holes on the opposite side. A 7. Fasten the bottom of the handle to the bottom of the freezer door. 8. Remove the door stop from the bottom of the freezer door. 2. Remove the two screws from the bottom of the freezer door handle. 3. Slide the handle downward to release it from the keyhole slot and pull the handle away from the door. A AB A. Door stop screw B. Door stop 9. Move the door stop to the opposite side making sure that the hole in the door stop plate is aligned perfectly with the hole for the center hinge pin. 10. Using the screw removed in Step 9, fasten the door stop to the bottom of the freezer door. A B A. Freezer handle B. Flat-head handle screws 4. Using the plastic tool (provided), remove the brand badge from the freezer door by prying up the right-hand side and slowly peeling the badge away from the door, revealing the hole to mount the door handle. NOTES: ■ To avoid scratching the finish, do not use a sharp or metallic object to pry the brand badge from the door. ■ Rub a small amount of liquid dish soap over any adhesive residue with your fingers. Rinse the door with warm water and dry with a soft cloth. 5. Remove the shoulder screw from the left-hand side of the door and fasten it into the hole that was behind the brand badge. 6. Align the keyhole slot in the handle mounting bracket with the shoulder screw. Position the handle so that the mounting base is flush against the door. Slide the handle upward until it locks into place. A A. Door stop screw 11. Tighten all screws. Set aside the freezer door until the hinges and refrigerator door are in place. Reverse Refrigerator Door 1. Remove the door stop from the bottom of the refrigerator door. AB A. Door stop screw B. Door stop 1. Replace the door stop on the opposite side of the refrigerator door, making sure that the hole in the door stop plate is aligned perfectly with the hole for the bottom hinge pin. 2. Fasten the door stop to the door. 3. Remove the screws from the top of the refrigerator door handle. A. Freezer handle 8 B B. Flat-head handle screws