Maytag MHWE500VW Use and Care Guide - Page 18

Preset cycle settings Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The preset settings provide the recommended fabric care for the selected cycle. See chart. Cycles Soil Level (cycle time) Water Temp Spin Speed Whitest Whites Normal (1:35) Hot/Cold Extra High Heavy Duty Normal (1:10) Hot/Cold Extra High Normal/Casual Normal (0:50) Warm/Cold High Quick Wash Light (0:30) Warm/Cold Extra High Delicate Normal (0:40) Cold/Cold Low Handwash Normal (0:30) Cold/Cold Low Soak Normal (0:30) Warm/Cold No Spin Clean Washer N/A N/A N/A (1:05) Rinse&Spin N/A (0:22) Cold/Cold Extra High Drain&Spin N/A N/A (0:13) Extra High To change the preset cycle settings Press the selector of each setting until the desired setting illuminates. Normal Washer Sounds As with any new product, you will hear sounds that you are not accustomed to. You may hear various sounds when the door is locked and unlocked, and during the washing, rinsing, and spinning process. Between changes in wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles. These new sounds and pauses are part of normal washer operation. Options You can customize your wash by adding options to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all options are available with all cycles. „ See the "Laundry Guide" for an overview of possible options for each Wash Cycle selection. „ You can select more than one option for a cycle. Some options cannot be added to some cycles; for example, Steam Clean cannot be added to the Quick Wash cycle. „ If an option is available with a selected cycle, the light for that option will illuminate when selected. „ If an option is unavailable with a selected cycle, there will be a short tone, and the light for that option will not illuminate when selected. Signal On/Off Use this option to turn the buzzer indicating the end of the cycle on or off. Max ExtractTM Use this option to add an additional spin to any cycle to improve drying times for some heavy fabrics by reducing excess water, which may save energy. 18