Meade StarNavigator 90mm Instruction Manual - Page 7
Assembly View: Starnavigator Reflecting Telescopes
View all Meade StarNavigator 90mm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY VIEW: STARNAVIGATOR REFLECTINGTELESCOPES E F 10 Fig. 1b (Inset): (E) Altitude setting circle; (F) Altitude lock. 2 1 12 1. Focus Knob 2. Eyepiece Holder 3. 90° Diagonal Prism (refractors only) (not visible) 4. Eyepiece Holder Thumbscrew 5. Eyepiece 6. Focus Lock Knob 16 7. Red Dot Viewfinder 8. Red Dot Viewfinder Alignment Screws 24 9. Compass/Bubble Level (refractors only) 10. Altitude Setting Circle and Lock 23 11. Dew Shield (refractors only) 12. Dust Cap 22 13. Optical Tube 14. Cradle Ring Lock Knob 15. Cradle Ring 16. Mounting Arm and Shaft 17. Computer Control Panel 18. Accessory Tray Attachment Bolts 19. Accessory Tray 20. Inner Support Struts 21. Tripod Leg Locks 22. Tripod Legs 23. Tripod Base 20 24. Azimuth Setting Circle 25. Battery Compartment 26. Base Lock Knob 54 6 7 8 14 15 13 25 10 (opposite side) 17 26 18 IMPORTANT NOTE: Do not remove the velvet pads from this end of the telescope. Features of the StarNavigator Series telescopes are virtually identical. Certain features of your telescope may look different than, or be positioned slightly differently than the one pictured here, but the functionality of the features is the same. 5 6 4 17 2 21 19 A B C D Fig. 1c (Inset): Computer control panel. (A) Handbox port; (B) Power indicator light, (C) ON switch; (D) Auxiliary port. Fig. 1: StarNavigator Series Reflecting Telescope. 1 Fig. 1e (Inset): Focus assembly. Looking at or near the Sun will cause irreversable damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.