Miele Classic G 4275 SCVi Operating and Installation manual - Page 12

Before using for the first time Adjusting the dosage The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 0 to 6. - Use a higher setting if spots appear on dry glassware. ^ Use a lower setting if streaking appears on dishes or glasses. ^ Turn the dishwasher off "V". ^ Press and hold the "Program" button and at the same time turn the dishwasher on g. Hold the "Program" button until the "Rinse & Hold" indicator comes on. If it does not come on start over. ^ Press the "Program" button three times. The "Intake / Drain" indicator flashes three times in intervals. The "SaniWash" indicator flashes 3 times in intervals. The rinse aid dosage is adjusted to 3 ml by default. The amount set can be recognized by the flashing rhythm of the "SaniWash" indicator (see table): Dosage in ml 0 1 2 3 4 5 6 Flashing rhythm - Once Twice 3 times 4 times 5 times 6 times ^ Press and hold the "Program" button until the "Intake / Drain" indicator lights up. ^ Select the desired setting with the "Program" button. Every touch of the button increases the level. The programmed dosage is saved. ^ Turn the dishwasher off "V". 12