Miele Classic G 4275 SCVi Operating and Installation manual - Page 30
Default settings 30
View all Miele Classic G 4275 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Additional options Default settings All settings can be reset to the factory default. ^ Open the door. ^ Turn the dishwasher off "o". ^ Press and hold the "Program" button and at the same time turn the dishwasher on "g". Hold the "Program" button until the "Rinse & Hold" program indicator comes on. If it does not come on, start over. ^ Press the "Program" button 12 times. The "Intake / Drain" indicator flashes once long and twice short in intervals. The setting can be recognized by the flashing of the "SaniWash" indicator: - flashing: all settings are factory default - not lit up: at least one setting was changed ^ To change the setting press the "Program" button for at least one second, until the "Intake / Drain" indicator lights up. ^ Press the "Program" button. The setting is saved. ^ Turn the dishwasher off "o". 30