Miele Classic G 4275 SCVi Operating and Installation manual - Page 31

Frequently asked questions 31, Technical faults 31

Get Miele Classic G 4275 SCVi PDF manuals and user guides View all Miele Classic G 4275 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Frequently asked questions With the aid of the following guide, minor problems can be fixed without a service call. ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Technical faults Problem The program does not start. Possible fault The door is not properly closed. The machine is not plugged in. The fuse is defective or the breaker has tripped. The dishwasher is not turned on. The dishwasher stops during a program. The fuse has tripped. The buzzer sounds. There may be a technical fault. All program indicators are flashing fast when the door is open. The drain pump is The waterproof system running when the has activated. door is opened. Solution Close the door firmly. Insert the plug. Reset the circuit breaker. See data plate for minimum amperage. Turn the dishwasher on "g" and select a program. Reset the circuit breaker. See data plate for minimum amperage. Turn the dishwasher off "o". After a few seconds: - Turn the dishwasher on. - Select the desired program with the program button. - Close the door. If the problem persists contact Technical Service. - Turn off the water supply. - Contact Miele Technical Service. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
With the aid of the following guide, minor problems can be fixed without a service call.
,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem
Possible fault
Solution
The program does
not start.
The door is not properly
closed.
Close the door firmly.
The machine is not
plugged in.
Insert the plug.
The fuse is defective or
the breaker has tripped.
Reset the circuit breaker.
See data plate for minimum
amperage.
The dishwasher is not
turned on.
Turn the dishwasher on "
g
" and
select a program.
The dishwasher
stops during a
program.
The fuse has tripped.
Reset the circuit breaker.
See data plate for minimum
amperage.
The buzzer sounds.
All program
indicators are
flashing fast when
the door is open.
There may be a technical
fault.
Turn the dishwasher off "
o
".
After a few seconds:
– Turn the dishwasher on.
– Select the desired program
with the program button.
– Close the door.
If the problem persists contact
Technical Service.
The drain pump is
running when the
door is opened.
The waterproof system
has activated.
– Turn off the water supply.
– Contact Miele Technical
Service.
Frequently asked questions
31