Miele Classic G 4275 SCVi Operating and Installation manual - Page 27

At the end of a program 27, Interrupting a program 27, Changing a program 27

Get Miele Classic G 4275 SCVi PDF manuals and user guides View all Miele Classic G 4275 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Use At the end of a program ^ Open the door a few inches to see if the program has finished. In the "Express" program, the drying fan will run for a few minutes after the program is completed. The indicator of the selected program has gone out. If the program indicator is still on, the program is still running. Close the door again to allow the program to finish. Keep the door open slightly. The dishes will cool much faster. ^ Unload the dishwasher. Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket. ^ Turn the dishwasher off "V". The dishwasher continues to use electricity until turned off with the "o" button. If the dishwasher is not used for a longer period of time, e.g. vacationing, turn off the water supply. Interrupting a program A program is interrupted as soon as the door is opened. If the door is closed, the program will continue from where it was interrupted. ,Open the door with care. The water in the dishwasher is hot. Danger of scalding. Before closing the door again, leave it ajar for approx. 20 secs. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place. Changing a program If the detergent flap is already open, do not change the program. If a program has already started and you wish to change it: ^ Open the door. ^ Press the "o" button. ^ Press the "g" button. ^ Select the desired program with the program button. ^ Start the program by closing the door. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
At the end of a program
^
Open the door a few inches to see if
the program has finished.
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
The indicator of the selected program
has gone out.
If the program indicator is still on,
the program is still running. Close
the door again to allow the program
to finish.
Keep the door open slightly. The dishes
will cool much faster.
^
Unload the dishwasher.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^
Turn the dishwasher off "
V
".
The dishwasher continues to use
electricity until turned off with the
"
o
" button.
If the dishwasher is not used for a
longer period of time, e.g. vacationing,
turn off the water supply.
Interrupting a program
A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
,
Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.
Changing a program
If the detergent flap is already open,
do not change the program.
If a program has already started and
you wish to change it:
^
Open the door.
^
Press the "
o
" button.
^
Press the "
g
" button.
^
Select the desired program with the
program button.
^
Start the program by closing the
door.
Use
27