Miele Classic G 4275 SCVi Operating and Installation manual - Page 29

Additional options 29, Buzzer 29, Buzzer

Get Miele Classic G 4275 SCVi PDF manuals and user guides View all Miele Classic G 4275 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Additional options Buzzer A signal sounds at the end of a program and when a fault occurs. The buzzer at the end of a program sounds five times in quick succession for up to one hour. The buzzer for a fault sounds continuously for up to two minutes. The buzzer is activated by default. It can be turned off, so it does not sound at the end of a program. The buzzer for a fault cannot be turned off. ^ Open the door. ^ Turn the dishwasher off with "o". ^ Press the "Program" button and at the same time turn the dishwasher on with "g". ^ Hold the program button until the "Rinse & Hold" program indicator comes on. If it does not come on, start over. ^ Press the "Program" button four times. The "Intake / Drain" indicator flashes four times in intervals. The setting can be recognized by the flashing of the "SaniWash" indicator: - flashing: buzzer is activated - not lit up: buzzer is deactivated ^ To change the setting press the "Program" button for at least one second, until the "Intake / Drain" indicator lights up. ^ Press the "Program" button. The setting is saved. ^ Turn the dishwasher off "o". 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Buzzer
A signal sounds at the end of a
program and when a fault occurs.
The buzzer at the end of a program
sounds five times in quick succession
for up to one hour.
The buzzer for a fault sounds
continuously for up to two minutes.
The buzzer is activated by default. It
can be turned off, so it does not sound
at the end of a program. The buzzer for
a fault cannot be turned off.
^
Open the door.
^
Turn the dishwasher off with "
o
".
^
Press the "Program" button and at the
same time turn the dishwasher on
with "
g
".
^
Hold the program button until the
"Rinse & Hold" program indicator
comes on.
If it does not come on, start over.
^
Press the "Program" button four
times.
The "Intake / Drain" indicator flashes
four times in intervals.
The setting can be recognized by the
flashing of the "SaniWash" indicator:
– flashing: buzzer is activated
– not lit up: buzzer is deactivated
^
To change the setting press the
"Program" button for at least one
second, until the "Intake / Drain"
indicator lights up.
^
Press the "Program" button.
The setting is saved.
^
Turn the dishwasher off "
o
".
Additional options
29