Miele DA 6690 D Product Manual - Page 35
haust socket, e.g. with a hose clip, Secure the exhaust ducting to the ex‐
View all Miele DA 6690 D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
28250/8m" m 22805m/8m" Installation dai3435aus Draw two intersecting lines on the ceiling. For vented mode: - Place a section of the exhaust duct‐ ing in the ceiling and feed it down through the cross-sectional area as illustrated. Exhaust ducting of ap‐ prox. 27 9/16" (700 mm) length is re‐ quired between the ceiling and the hood exhaust socket. - Secure the exhaust ducting to the ex‐ haust socket, e.g. with a hose clip (available as an optional accessory) on flexible ducting. Place the power cord and guide it through the ceiling in the area shown. A power cord approx. 27 9/16" (700 mm) in length is required be‐ tween the ceiling and the hood con‐ nectors. 35
Installation
35
8
5
/
8
"
220 mm
8
5
/
8
"
220 mm
dai3435aus
Draw two intersecting lines on the
ceiling.
For vented mode:
–
Place a section of the exhaust duct‐
ing in the ceiling and feed it down
through the cross-sectional area as
illustrated. Exhaust ducting of ap‐
prox. 27 9/16" (700 mm) length is re‐
quired between the ceiling and the
hood exhaust socket.
–
Secure the exhaust ducting to the ex‐
haust socket, e.g. with a hose clip
(available as an optional accessory)
on flexible ducting.
Place the power cord and guide it
through the ceiling in the area shown.
A power cord approx. 27 9/16"
(700 mm) in length is required be‐
tween the ceiling and the hood con‐
nectors.