Miele F 1901 Vi Operating and Installation manual - Page 39
Problems with the ice maker, Issue, Possible fault, Solution, The ice cube maker, will not switch on.
View all Miele F 1901 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Frequently asked questions Problems with the ice maker Issue Possible fault Solution The ice cube maker The appliance is not will not switch on. plugged in. Check that the appliance is connected to the power supply. The ice cube maker is When the appliance is turned on for the very first time, it not producing any ice can take up to 10 hours for the first ice cubes to drop cubes. out of the ice cube maker and collect in the container. The appliance is not turned Check that the appliance is on. switched on. The water supply line was not primed (purged of air) before the appliance was used for the first time. Contact Miele. Check if: - the ice cube maker is switched on. See "Ice Cube Maker" and/or "Plumbing" for more information. - the water supply line is open. - there are ice cubes stuck together and blocking the exit. - the ice cube container is in the right position. - the freezer compartment temperature is too high. - the water pressure is too low. The water pressure must be between 25 and 120 psi (1.72-8.25 bar). Check whether the correct water valve has been installed. Self-tapping valves and 3/16" (4.76 mm) saddle valves reduce the water pressure and can block the pipe. 39