Miele F 1901 Vi Operating and Installation manual - Page 49
Stainless steel panels 49, Custom door panels 49, Installation options 49, F 18X1 Vi, Single column
View all Miele F 1901 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installation Stainless steel panels Side-by-side Stainless steel door panels and toe-kick covers are available from Miele. Custom door panels This appliance is compatible with all styles and designs of kitchen cabinetry. The total weight of the decorative panel(s) must not exceed the following: F 18X1 Vi 106 lbs (48 kg) F 19X1 Vi 79 lbs (36 kg) Fitting a door panel which is heavier than the max. permitted could damage the hinges. Installation options There are many different installation options. You are limited only by the design of the kitchen. This appliance can be installed "side-by-side" with another fridge/freezer using a "Merging Kit". The "Merging Kit" is available from Miele. Contact Miele or your dealer for specific information about which combinations will work with your appliance. For instructions on how to attach the appliances and install the heating mat, please refer to the instructions included with the "Merging Kit", available from Miele. Installation without a partition using the "Merging Kit" The door hinge cannot be exchanged. Single column The appliance can be installed at any preferred location in the kitchen. However, be sure the door will open and close properly in the chosen location. If the appliances are installed directly next to each other (without a partition), they need to be attached together using the "Merging Kit". 49