Motorola 68230 Operation Guide - Page 16
Software, FCC Part 68 and Telephone Company Procedures and Requirements, for DSU
View all Motorola 68230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Cabling All cables for the Vanguard 300/305 are the same cables used for the 6500 Series. For example, DB25 cables, the 6509 EIM telco cable, and 6520 Ethernet cables currently available for the 6500 Series can be used with the Vangua rd 300/305. The DSU telco cable is provided with the DSU daughtercard. Port 4 requires a DECconnect interface cable on the Vanguard 300, and a straight through 8conductor RJ45 cable (e.g. Inmac P/N Q0462-1 or Black Box P/N RM-EL08MS07) for the Vanguard 305. See "Vanguard 300 Cabling Pinouts" and "Vanguard 300 Cabling Pinouts" in the "Connecting to the CTP" section in Chapter 2 for information about the pinouts of the RJ45 to DB25 adapter. Software Introduction This section describes the operating software for the Vanguard 300/305. Operating Software The operating software is compressed in FLASH and loaded into RAM for operation. There are a variety of operating software bundles available for the Vanguard family. See the Software Release Notice accompanying your Vanguard product for feature information on the operating software for the Vanguard 300/305, and see the Vanguard 300/305 Software Download Guide (Part No. 09965-1, Rev B) for information on installing the operating software. FCC Part 68 and Telephone Company Procedures and Requirements for DSU Introduction Before the Motorola Vanguard 300/305 can be connected to the network, you must: • Provide the local telephone company with the equipment's registration number • Order the proper connections This information is for North America only. How to Order Connections To order the proper connections, provide the telephone company with the following information: • Interface type • Required USOC jack connector number • Service code • Facility interface codes