Motorola 68230 Operation Guide - Page 3

About This Manual Introduction This manual describes features, hardware, specifications, and applications for the Motorola Vanguard 300 and Vanguard 305 Frame Relay Access Devices (FRADs). For information on operating system software and configuration see the 6500 Series Documentation Kit, which includes the 6500 Series Introduction Manual and the 6500 Series Configuration and Administration Manual. Audience This manual is intended for operators of the Motorola Vanguard 300/305 FRAD. Software Revision Level The Vanguard 300 runs Release 4.33 or higher releases of operating software. The Vanguard 305 runs Release 4.49 or higher. Special Notices The following notices emphasize certain information in the manual. Each serves a special purpose and is displayed in the format shown: IMPORTANT: Important is used to emphasize any significant procedural information. Caution provides you with information that, if not followed, can result in damage to software, hardware, or data. Warning is the most serious notice, indicating that you can be physically hurt. How to Use This Manual The following table describes the contents of this guide. This chapter... Chapter 1 Chapter 2 Chapter 3 Chapter 4 Describes Vanguard 300/305 hardware and software features, and FCC Part 68 guidelines and Telephone Company procedures. Setting up a Vanguard 300/305, including site preparation, how to unpack the unit, installation procedures, powerup and diagnostic procedures, and how to connect to the Control Terminal Port Vanguard 300/305 applications and configuration information, including step-by-step configuration sequences Maintaining the Vanguard 300/305, including replacing option cards and troubleshooting information