Motorola 68230 Operation Guide - Page 8
Standard Features, CTP Port, DSU Functionality
View all Motorola 68230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Standard Features The Vanguard 300/305 features 1, 2, or 3 port Serial FRAD functionality with LAN access to Frame Relay networks. All Vanguard 300/305 base units provide the following: • Control Terminal Port (CTP) for configuration and management • Dual link ability • Optional DSU • Optional ISDN Daughtercards • Ethernet (Vanguard 300) or Token Ring (Vanguard 305) interface • Frame Relay and X.25 service • X.25 PAD support • X.25 PAD support • Multiprotocol support • SNMP management • Software download through Trivial File Transfer Protocol (TFTP) • Fully compatible with 6500 PLUS and 6520. • RFC 877 encapsulation CTP Port Port 3 on the Vanguard 300/305 can be used as a CTP for configuration, reporting, and troubleshooting. You can default Port 3 for CTP access from the front panel of the Vanguard. See "Connecting to the CTP" in Chapter 2 for more details. DSU Functionality The DSU daughtercard functionality suits an extended range of 56 kbps point-topoint DDS1 interface that conforms to AT&T 62310 or ANSI T1E1.4/91-006. The DSU is FCC Part 68 registered. Diagnostic loopbacks from the telephone company are supported; local diagnostics are activated from the CTP.